12V Solenoid Valve – 3/4″
$10.90
12V Solenoid Valve – 3/4″ .
solenoid valve coil 3/4″ DC 12V 24V or AC220V Electric Solenoid Valve Normally Closed N/C Water Inlet Flow Switch 0.02 – 0.8Mpa
Product Characteristics:
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4″ threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
Pick up Location: Kingsford (Sydney) NSW 2032, Australia
5 in stock
Description
DC12V 24V AC 220V 3/4″ Plastic Solenoid Water Valve N/C Normally Closed
Specifications:
- Voltage: 12V DC / 24V DC / 220V AC
- Rated Power: 5W
- Operation model : Normally closed (N/C)
- Pressure: 0.02 – 0.8Mpa
- Port size: G3/4”(≈26.8mm±0.5mm)
- Fluid temperature: 0-100 degrees Celsius
- Usage: water and low viscosity fluids
- Flow characterastics
Package included:
- 1 x plastic solenoid valve
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4″ threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it’s actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve. A garden hose or other pressurized system should work just fine.