Screw – Phillips Head (1″, 4-40, 10 pack)
$0.70
Product Characteristics:
Standard Philips-head 4-40 screws. They are 1″ long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.
Pick up Location: Kingsford (Sydney) NSW 2032, Australia
10 in stock
Description
Screw – Phillips Head (1″, 4-40, 10 pack):
Screw – Phillips Head (1″, 4-40, 10 pack) is the screw size we use in most of the holes for our breakout boards.
Product Specification
Pan head machine screws are machine screws with heads that are flat on top and rounded on the sides. Pan head machine screw length is measured from under the head to the end of the screw. Phillips drive is x-shaped for installation with a phillips screw driver.
OVERVIEW
Machine screws are meant to apply two metal work pieces together, with the use of a threaded pre-tapped hole or through a hole and held with a nut. They are threaded the entire length of the shank. The length of a machine screw is measured from under the head to the point of the screw.
- 10 pieces per retail package
- Used to fasten metal parts together for interior or exterior projects; common applications include machines, appliances, electronic devices and vehicles
- The zinc finish provides moderate corrosion protection
- Fasten with a screwdriver to reduce the risk of over-tightening as well as to protect the screw and the fastened material
- Matching nuts included
