Stepper Step Motor 5V 4-Phase
$1.95
Stepper Step Motor 5V 4-Phase can be driven by ordinary ULN2003 chip can also be connected in phase 2 development board used for supporting the use of a direct plug and easy to use stepper motor used in the development board.
Product Characteristics:
Type : Drive IC
Rated Voltage: DC5V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625/64
DC Resistance: 200±7% (25)
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.
Temperature Rise: <40K(120Hz)
Noise: <40dB (120Hz, No load, 10cm)
Board Size: Approx. 29 ×21 mm
Pick up Location: Kingsford (Sydney) NSW 2032, Australia
3 in stock
Description
Description of Stepper Step Motor 5V 4-Phase
Model:28BYJ-48
Diameter: 28mm
Voltage: 5V DC
Phase:4
Wire Length :23.5CM
Step angle: 5.625 x 1/64
Reduction ratio: 1/64
5 lines cable 4 phase stepper motor can be driven by ULN2003 chip, can also be connected in phase 2 development board used for supporting the use of a direct plug and easy to use stepper motor used in the development board
Weight:34g
Stepper Step Motor 5V 4-Phase can be driven by ordinary ULN2003 chip can also be connected in phase 2 development board used for supporting the use of a direct plug and easy to use stepper motor used in the development board.
Features :
*100% Brand new and high quality
*Made of high quality material, more durable.
*Low noise, reliable use
*DC 5V 4-phase stepper motor + for Arduino driver test module board
*A, B, C, D four-phase LEDs indicate the working state of the stepper motor
*Stepper motor with standard interface for direct insertion
Specifications:
*Color: As Pictures Show
*Rated voltage: DC5V 4 phase
*Step angle: 5.625 x 1/64
*No load absorption frequency: >600Hz
*No-load extraction frequency: >1000Hz
*Pulling torque: >34.3mN.m (120Hz)
*stop torque: >34.3MN.m
*DC resistance: 200Ω±7% (25C)
*Insulation resistance: >10MΩ (500V)
*Dielectric strength: 600V AC / 1mA / 1s
*Edge rating: A
*Temperature rise: <40K (120Hz)
*Noise: <40dB (120Hz, no load, 10cm)
